جهت راه اندازي موتورهاي پله اي از اين درايور استفاده مي شود . اين درايور مبتني بر آيسي TB6600 متعلق به توشيبا ساخته شده است. و قابليت راه اندازي استپ موتور ها در مد ميکرو استپ را دارد. در درايو ميکرو استپ تعيين زاويه ي هر گام مقدور مي باشد. ويژگي ها: ولتاژ تغذيه:9 تا 42 ولت DC حداکثر جريان خروجي: 5 آمپر راه اندازي موتورهاي 2 فاز و 4 فاز ايزولاسيون نوري براي ورودي هاي سيگنال داراي حفاظت هاي حرارتي و اضافه جريان کاربرد: راه اندازي استپ موتورهاي 2 فاز يا 4 فاز در صنايع ، دستگاه هاي CNC و ...

Stepper Motor Driver, MYSWEETY TB6600 0.2-5A Nema 17/23 CNC Controller Stepper Motor Driver 1 Axis 2 Phase Hybrid Stepper Motor Description HY-DIV268N-5A is is a PWM chopper-type single-chip bipolar sinusoidal micro-step stepping motor driver. 2-phase bipolar-type stepping motor can be driven by only clock signal with low vibration and high efficiency. Suitable for drive Two-phase stepping motor dynamic voltage 12V to 48V, the maximum drive current is less than 5A and having outer diameter of 35 to 86 mm. This drive uses the current loop subdivision control, the motor torque ripple is very small, low-speed running is very smooth. High-speed torque is much higher than other two-phase drives, high positioning accuracy. Widely used in the engraving machines, CNC machine tools, packaging machinery and other high resolution requirements on the device. NEMA17, NEMA23, NEMA24 and NEMA34 stepper motors work perfectly with this HY-DIV268N-5A Stepper Driver. Features PWM constant current drive single-chip bipolar sinusoidal micro-step stepping motor driver Selectable excitation mode (1/1, 1/2, 1/4, 1/8, and 1/16 step) Single power supply Average current control (in 8 steps from 0.2A to 5A), two-phase sinusoidal current drive output DC 12 ~ 42V Single power supply operation Optically isolated inputs Over voltage, under-voltage, over-current, and short-circuit protection High starting speed High-speed torque Black Rugged Plastic Enclosure and Large Black Aluminium Heat Sink Mounting Holes on Heat Sink for Mounting the Drive in Machine Panels Technical Specifications Input voltage DC 8 ~ 50V input (Operating Voltage: 12V – 42V) The input current of 1 to 5 amps Output current: IOUT= 5.0 A (absolute maximum ratings, peak, within 100ms) IOUT= 4.5 A (operating range, maximal value) Operating Temperature: -10 to 45 ? Storage temperature: -40 ? to 70 ?