ترانسفورماتور دو کاناله
HN2064DG
10/100Base-T Dual Port Transformer For Modules
کیفیت: ORIGINAL(distributor) پکیج: DIP-20
قیمت تک فروشی 491,118 ریال
قیمت عمده 469,636 ریال (10 به بالا)
قیمت ویژه 461,043 ریال (100 به بالا)
قیمت فوق العاده456,747 ریال (1000 به بالا)
قیمت تک فروشی 0.838 تتر با تخفیف
4.123.923.843.8
|
توضیحات
يک نقطه پاياني شبکه محلي معمولي (LAN) شامل چندين لايه است که در مدل OSI تعريف شده توسط کنسرسيوم IEEE 802.3 سازماندهي شده اند. لايه اول که به لايه PHY (فيزيکي) معروف است، شامل الزامات رابط الکتريکي مانند سيگنال دهي ديفرانسيل، جداسازي الکتريکي و فيلتر است. اين يادداشت کاربردي بر روي رابط الکتريکي لايه PHY تمرکز خواهد کرد. براي اينکه يک سيستم ارتباطي نرخ داده اي را که با الزامات IEEE مطابقت دارد حفظ کند، مهم است که نرخ خطاي بيت (BER) را همانطور که توسط PHY مشاهده مي شود به حداقل برسانيم. انتقال داده ها از طريق يک جفت پيچ خورده بدون محافظ (UTP) بسيار مستعد تداخل الکترومغناطيسي (EMI) از محيط هاي اطراف است.
از آنجايي که تمام کابل کشي هاي Base-T به عنوان UTP تعريف مي شوند، جداسازي کامل خطوط از يکديگر و محيط اطراف آنها از نظر هزينه غيرعملي مي شود. راه حل تا حدودي در کيفيت کابل کشي جفت پيچ خورده و مغناطيسي مورد استفاده براي کاهش نويز تحميل شده بر روي اين خطوط مسي نهفته است. براي درک چگونگي استفاده از ترانسفورماتورها براي فيلتر کردن نويز، ابتدا بايد سيگنال هاي مورد استفاده در شبکه هاي محلي را بشناسيد.
مغناطيسي LAN براي محدود کردن نويز حالت معمول استفاده مي شود و در عين حال جداسازي دستگاه هاي فرستنده و گيرنده را نيز فراهم مي کند.
Description
A typical local area network (LAN) endpoint comprises of several layers organized in the OSI model defined by the IEEE 802.3 consortium. The first layer, known as the PHY (physical) layer, consists of electrical interface requirements like differential signaling, electrical isolation and filtering. This application note will focus on the electrical interface of the PHY layer. For a communication system to sustain data rates that comply with IEEE requirements, it is important to minimize the bit error rate (BER) as seen by the PHY. Data transmission through an unshielded twisted pair (UTP) is highly susceptible to electromagnetic interference (EMI) from the surrounding environments.
Since all Base-T cabling is defined as UTP, completely isolating the lines from each other and their surroundings becomes impractical from a cost standpoint. The solution partly lies in the quality of the twisted pair cabling and the magnetics utilized for reducing noise imposed upon these copper lines. To understand how the transformers are utilized for filtering out noise, it is important to first know the signals used in local area networks.
The LAN magnetics are used to limit the common mode noise while also providing isolation from the transmit and receive devices.
|
کلیه حقوق این سایت متعلق به فروشگاه Skytech می باشد