| ماژول رمزگذار چرخشی KY-040 Rotary encoder module that can be used to add rotary encoder functionality to Arduino projects کیفیت: ORIGINAL(distributor)       پکیج: MODULE  قیمت تک فروشی  864,091  ریال   
  قیمت عمده   760,364  ریال (10 به بالا)  
  قیمت ویژه  747,916  ریال (100 به بالا)  
 قیمت فوق العاده741,693  ریال (1000 به بالا)  
    قیمت تک فروشی 0.927  تتر با تخفیف  3.462.972.912.88 | 
        
                       
     
                          
                        
                 
                   
                  
            
            
              
                  
                  
				
                  
                     
                  
	
		| توضیحات
			              	    ماژول KY-040 يک انکودر چرخشي است که بر اساس ميزان چرخش دستگاه و جهت چرخش آن، سيگنال الکتريکي توليد ميکند. اين ماژول يک حسگر موقعيت با يک دسته دارد و ميتواند براي کنترل موتورهاي استپر يا سرو با دقت استفاده شود.ويژگيها و مشخصات KY-040 عبارتند از:
 ولتاژ کاري: 5 ولت
 
 زاويه مکانيکي: 360 درجه
 
 خروجي: کد خاکستري 2 بيتي
 
 تعداد موقعيتها در هر دور: 30 براي اتصال ماژول KY-040 به ميکروکنترلر يا پردازنده ميکرو، دو پين براي تغذيه (+ و GND) و دو پين ديجيتال (CLK و DT) را به ميکروکنترلر متصل کنيد.
 اين ماژول با چرخش دسته، سيگنال ديجيتال (موج مربعي) توليد ميکند. براي تعيين جهت چرخش، نياز به تشخيص تغيير حالت خروجيها است. اگر خروجي A اول تغيير حالت کند، دسته به سمت ساعتگرد چرخش ميکند و اگر خروجي B اول تغيير حالت کند، دسته به سمت مخالف ساعتگرد چرخش ميکند.
 
 
 Description
                                     The KY-040 module is a rotary encoder that generates an electrical signal based on the amount of rotation of the device and the direction of its rotation. This module has a position sensor with a handle and can be used to precisely control stepper or servo motors.Features and specifications of KY-040 are:
 Working voltage: 5 volts
 
 Mechanical angle: 360 degrees
 
 Output: 2-bit gray code
 
 Number of positions per round: 30 To connect the KY-040 module to the microcontroller or micro processor, connect two pins for power (+ and GND) and two digital pins (CLK and DT) to the microcontroller.
 This module produces a digital signal (square wave) by rotating the handle. To determine the direction of rotation, it is necessary to detect the change of the output state. If output A changes state first, the handle rotates clockwise, and if output B changes state first, the handle rotates counterclockwise.
 | 
                  
                  
				
               
		
            
		 
           
                  
                   
         
 
 
	
        کلیه حقوق این سایت متعلق به  فروشگاه Skytech  می باشد